Astralpool VRAC III Basic 70768 User Manual

S Y S T E M V R A C I I I
INSTALLATION AND MAINTENANCE MANUAL
MANUEL D’INSTALLATION ET D’ENTRETIEN
MANUAL DE INSTALACIÓN Y MANTENIMIENTO
MANUALE DI INSTALLAZIONE E MANUTENZIONE
INSTALLATIONS-UND BEDIENUNGSANLEITUNGEN
MANUAL DE INSTALAÇÃO E MANUTENÇÃO
Modbus® is a registered trademark of the Modbus
Organization, Inc.
BASIC AUTOMATIC MULTIPORT VALVE
VANNE MULTIVOIES AUTOMATIQUE BASIC
VÁLVULA SELECTORA AUTOMÁTICA BASIC
VALVOLA SELETTRICE AUTOMATICA BASIC
AUTOMATISCHES MEHRWEGE VENTIL BASIC
VÁLVULA SELECTORA AUTOMÁTICA BASIC

Astralpool VRAC III Basic 70768 Specifications

General

Brand	Astralpool
Model	VRAC III Basic 70768
Category	Control Unit
Language	English

Summary

General Safety Information

General Safety Regulations

Provides essential safety guidelines and regulations for the valve's installation and operation.

Advice During Installation and Operations

Advice During Installation and Assembly

Key precautions for electrical wiring and assembly operations to ensure correct installation.

Advice for Putting into Service

Steps to verify calibration and readiness before operating the automatic valve.

Advice During Installation and Maintenance Work

Guidelines for safe installation, assembly, and maintenance, emphasizing electrical safety.

Valve Characteristics and Operating Positions

Specifications

Installation Procedures

Hydraulic Installation

Electrical Connection

Guidance on connecting the automatic valve's control module to the electrical cabinet.

Example: Single Phase 230V Electrical Cabinet

Fuse Protection

Pressure Switch Adjustment

Step-by-step guide for correctly setting the pressure switch for filter washing.

Maintenance and Guarantees

Hydraulic Installation Maintenance

Specific Valve Maintenance

Operation and Programming (Part 1)

Control Panel Overview

Description of the valve's control panel, including buttons, LEDs, and their functions.

Washing by Timing

Washing Using the Press Button

Operation and Programming (Part 2)

Washing by Pressure

Programming Washing and Rinse Times

Drainage Operations

Operation and Programming (Part 3)

Fault Indication and Reset

Describes fault codes indicated by LED flashing patterns and steps to reset alarms.

Module Installation and Conversion

Disassembly of the Electronic Module

Installation of the Module on the Valve

Communication and Troubleshooting

Solution of Possible Problems

Guidance on troubleshooting common issues that may arise with the valve system.