EasyManua.ls Logo

Astro Pneumatic 55670 User Manual

Default Icon
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Product Type:Model:
55670
7-IN-1 WORKBENCH
Page 1
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
INTENDED USE OF THE TOOL
The workbench is the ultimate 7-IN-1 WORKBENCH,
sawhorse, scaffold, platform, car creeper, dolly and
hand truck. The item can be transformed easily between
different modes by following the instruction manual. This
product is intended for DIY and light trade use. Do not
use this tool outside of the designed intent. Never modify
the tool for any other purpose or use.
Caution: To help prevent personal injury
Normal use of this product is likely to expose the
user to dust and/or microscopic particles
containing chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm. Always wear appropriate safety
equipment and clothing when using this product.
Study, understand and follow all instructions
provided with this product. Failure to read and
follow all warnings and operating instructions may
result in damages and serious injury or death.
Always wear ANSI approved goggles when using
this product. (Users and By standers).
Never use this tool for any application other than
for which it was designed.
Only use accessories designed for this tool.
Never alter or modify this tool in any way.
Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in
serious injury or death.
Always select the correct accessories of the correct
size and design for the job that you are attempting
to perform.
Always work in a clean, safe, well-lit, organized and
adequately equipped area.
Do not begin repairs without assurance that vehicle
is in secure position, and will not move during
repair.
WARNING
WARNING
www.astrotools.com
1 YEAR LIMITED WARRANTY
Astro Pneumatic Tool Co. warrants our products to the
original user against defective material or workmanship
for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the
right to determine whether the product failed because of
defective material, workmanship or other causes and to
charge back for missing parts. Astro Pneumatic Tool
Co., at its discretion, will repair products covered under
this warranty free of charge. The distributor should
direct the original user to return the product (with the
exceptions listed below) with the distributor’s name,
address, adequate proof of date of purchase or a copy
of warranty card, and a short note explaining the
problem. Failures caused by accident, alteration, or
misuse are not covered by this warranty.
Astro Pneumatic Tool Co. or its authorized service
representatives must perform all warranty repairs. Any
repair to the product by unauthorized service represen-
tatives voids this warranty. The rights under this
warranty are limited to the original user and may not be
transferred to subsequent owners.
This warranty is in lieu of all other warranties, expressed
or implied, including warranties of merchantability and
fitness for a particular purpose. Some states do not
allow the exclusion of limitations of incidental or conse-
quential damages so the above limitations may not
apply to you.
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
PRODUCT INFORMATION
DO NOT DISCARD – GIVE TO USER
7 different functions including: workbench, saw horse,
scaffold, platform, car creeper, dolly and hand truck
550lb max capacity in scaffold and platform mode
and 330lb max in other modes
Includes integrated power strip for standard power
cords and USB devices
4 hide-away caster wheels deploy for car creeper,
dolly and hand truck modes
43" x 21.75" work surface, 20.5" to 30.75" working height
Design features an extending tool tray, hanging hook,
push bar. 2 vice pegs, 2 quick clamp connection ports
and extendable locking legs
Question and Answer IconNeed help?

Do you have a question about the Astro Pneumatic 55670 and is the answer not in the manual?

Astro Pneumatic 55670 Specifications

General IconGeneral
BrandAstro Pneumatic
Model55670
CategoryTool Storage
TypeTool Chest
Number of Drawers7
MaterialSteel
ColorBlack

Summary

Safety Warnings and Precautions

General Safety Warnings

Study and follow all instructions to prevent injury. Wear safety equipment and use the tool as intended.

Intended Use of the Tool

The workbench is for DIY and light trade use. Do not use outside designed intent or modify the tool.

California Proposition 65 Warning

Product may expose users to chemicals known to cause cancer or reproductive harm. Always wear safety equipment.

Product Specifications and Warranty

1 Year Limited Warranty

Warrants products against defects for 1 year from first use. Excludes damage from accident, alteration, or misuse.

Product Information

Details the 7-in-1 functions, 550lb max capacity, integrated power strip, and design features.

Product Layout and Technical Details

Product Layout Diagram

Illustrates and labels key components of the 7-in-1 workbench.

Technical Specifications

Provides dimensions, work height, loading capacities for different modes, and net weight.

General Operation and Maintenance Advice

Assembly and Operation Warnings

Read and understand all instructions before operating. Failure to follow may result in serious injury.

Maintenance Recommendations

Examine workbench condition before use. Keep in good repair, have repairs made by qualified personnel.

Important Safety Considerations and Assembly

Important Safety Considerations

Follow safety precautions to avoid damage and serious injury. Be aware of overbalancing and secure the workbench.

Assembly Instructions Overview

The workbench comes fully assembled; follow simple setup steps to prepare for use.

Assembly Steps for Modes

Workbench Mode & Sawhorse Mode Assembly

Steps to set up legs and connect quick clamps for workbench or sawhorse configuration.

Scaffold Mode & Platform Mode Assembly

Steps to release legs, lock braces, and position the tool tray to form a platform.

Assembly for Additional Modes

Car Creeper & Dolly Mode Assembly

Instructions for installing wheels, gaskets, and screws for creeper/dolly mode.

Hand Truck Mode Assembly

Steps to pull up the handle from car creeper mode to form a hand truck.