In short: the EC01 has only memory if you ramp to a value.
It doesn’t memorize the floor, ceiling, or turbo levels when they’re reached by a shortcut. This is on purpose,
because people didn’t like losing their memorized level after using moon or turbo. To make it remember moon,
the user must ramp to it… typically, by ramping up a little then back down. Basically, it behaves that way
because that’s what people asked for.
Troubleshooting and Maintenance:
Disassembling the sealed head can cause damage to the light and void the warranty.
Astrolux recommends using high-quality batteries. Damage by battery leakage voids warranty.
If the flashlight will not be used for an extended period, please remove the battery.
Please unscrew the head one-half turn or take out the battery to prevent accidental activation during storage or
transportation.
Please use cleaning cloth to clean the thread every 6 months, and it will be better. Do use silicone grease to oil
thread.
Long-term usage can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved
spare.
Periodic cleaning of the battery contacts improves the flashlight’s performance as dirty contacts may cause the
flashlight to flicker, shine intermittently or even fail to illuminate for the following reasons:
Reason A: The battery needs replacement.
Solution: please replace battery. Please confirm the correct installation
Reason B: The threads, PCB board contact or other contacts are dirty.
Solutions: please clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods do not work, please refer to the warranty policy before contacting your authorized distributor.
Made in China
ASTROLUX EC01 User Manual – Download [optimized]
ASTROLUX EC01 User Manual – Download
Related Manuals:
1. Astrolux FT03 User Manual Astrolux FT03 The FT03 is a powerful EDC lamp. Rechargeable...
To Previous Page
Loading...