Astrolux EC01 - Switch LED and Usage; Switch Back Light; Flashlight Usage

°C °F
100 212 Boiling Water
60 140
55 131
50 122 Touch limit
45 111 [Default]
40 104
37,4 99 Body temp.
25 77
20 68
0 32 Frozen Water
MaxTemp. – 30°C = Clicks
Hint: If you don’t click, the lamp will leave the value unchanged. The lowest value the user can set is 31 C, by
clicking once.
Switch Back Light
The switch LED can be configured to do different things while the main emitters are off. There is one mode for the
regular OFF mode, and another mode for LOCKOUT mode. This allows the user to see at a glance whether the light
is locked.
Switch LED modes typically include:
– Off – Low – High – Blinking
To configure the LEDs, go to the mode you want to
configure and then click the button a few times:
– OFF mode: 7 clicks.
– LOCKOUT mode: 3 clicks.
This change the LEDs to the next mode on this light.
The switch LED stays on while the main emitters are on. Its brightness level is set in a way which mirrors the main
LED — off, low, or high.
Usage of the flashlight