Asus B75M-PLUS - Dram Timing Control; Cpu Power Management

ASUS B75M-PLUS
2-13
2.4.3 Memory Frequency [Auto]
Allows you to set the memory operating frequency. Conguration options: [DDR3-800MHz]
[DDR3-1066MHz][DDR3-1333MHz] [DDR3-1600MHz] [DDR3-1866MHz] [DDR3-2133MHz]
[DDR3-2400MHz]
2.4.4 iGPU Max.Frequency [Auto]
Auto: The iGPU frequency may be optimized depending on the system loading.
Manual: The input value is the optimal iGPU frequency. However, the frequency
may vary depending on the system loading.
2.4.5 EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Conguration options: [Disabled] [Enabled]
EPU Setting [Auto]
This item appears only when you set the EPU Power Saving Mode item to [Enabled] and
allows you to select the EPU power saving mode. Conguration options: [Auto] [Light Power
Saving Mode] [Medium Power Saving Mode] [Max Power Saving Mode]
2.4.6 GPU Boost [Auto]
Allows you to congure the GPU Boost settings. Conguration options: [Ok] [Cancel]
2.4.7 DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.4.8 CPU Power Management
The subitems in this menu allow you to set the CPU ratio and features.