2-2 Chapter 2: Setup
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
2.3 Attaching/Removing the MiniPC Kit
Attaching the MiniPC Kit
2
1
Removing the MiniPC Kit
2
1
2.4 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from +35˚ to -5˚and it allows 90˚ swivel
adjustment from either left or right. You can also adjust the monitor’s height
within +/- 150 mm.
• Only for BE24E: You can adjust the monitor’s angle from +35˚ to -5˚and it
allows 180˚ swivel adjustment (by removing the stop screw) from either left or
right. You can also adjust the monitor’s height within +/- 130 mm.
To Next Page
Loading...
