2-7ASUS BE27ACSBK Series LCD Monitor
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2.7 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
2.8 Setting up the monitor webcam as
default setting
When using a notebook with built-in webcam to connect this monitor, in
the device manager interface, you can find the notebook built-in webcam
and the monitor webcam. Normally, they are in enable status, and the
default setting is using notebook built-in webcam.
If you want to set up the monitor webcam as default setting, you need
disable the notebook built-in webcam. To identify the notebook built-in
webcam and disable it, please follow below instructions:
To Next Page
Loading...
