Connecting via a local area network (LAN)
To connect via a LAN:
1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your
computer and the other end to your LAN.
LAN
RJ-45 cable
3. Turn on the DSL/cable modem and your computer.
4. Congure the necessary Internet connection settings.
• Contact your network administrator for details or assistance in setting up your Internet
connection.
• For more details, refer to the sections Conguring a dynamic IP/PPPoE network connection
or Conguring a static IP network connection.
D500SD/S500SD/D500SDES/M500SD/D500SD_CZ
Modem
RJ-45 cable
D700SD/S700SD/D700SDES/M700SD/D700SD_CZ
44 Chapter 4: Connecting to the Internet
ENGLISH
ENGLISH
To Next Page
Loading...
