English
19
All-in-One PC ET232 Series
Powering on your All-in-One PC
WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug
to the system. Doing so may damage the AC-DC adapter.
Connect the supplied AC adapter to the DC IN jack on the rear panel ( 1, 2, and 3 ) and then
press the Power button on the front panel (4) of the All-in-One PC to power on the system.
NOTE: For details on turning o your All-in-One PC, refer to the section Turning o your All-in-
One PC in Working with Windows® 8.1.
To Next Page
Loading...
