Asus F2A85-V PRO - Page 138

4-34
Chapter 4: Software support
Chapter 4
Using Quick Connection
Conguring the PPPoE connection settings
Before enabling the Network iControl’s Quick Connection functions, you must congure the
PPPoE connection settings
To congure the PPPoE settings:
1. Right-click in the taskbar, and select Open Network and Sharing Center.
2. Right-click the PPPoE Connection, and select Properties.
3. Click the Options tab, and deselect Prompt for name and password, certicate,
etc. Click OK to complete the auto PPPoE connection settings.
• You only need to congure the PPPoE connection settings once.
• Obtain the necessary information about your PPPoE connection from your network
provider.