EasyManua.ls Logo

Asus Gryphon Z97 - Page 113

Asus Gryphon Z97
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ASUS GRYPHON Z97
3-45
Chapter 3
Allow Fan Stop 1/4 [Disabled]
These items allow the chassis fans to run at 0% duty cycle when the
temperature of the source is dropped below the lower temperature.
Conguration options: [Disabled] [Enabled]
ASST Fan 1 Q-Fan Control [Enabled]
These items allow you to set the assistant fans’ Q-Fan control feature into DC Mode or
disable these Q-Fan controls from your motherboard.
Conguration options: [Disabled] [Enabled]
The following items appear only when you set the Assistant Fan Q-Fan Control to
[Enabled].
ASST Fan 1 Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Conguration options: [CPU] [MB] [VCORE] [VCORE (BACK)] [DRAM] [PCH Core]
[USB3.0] [PCIE-1] [PCIE-2] [T_Sensor1] [T_Sensor2] [T_Sensor3]
If you select T_SENSOR 1/3, plug a thermistor cable to T_SENSOR 1/3 headers and stick
the thermistor cable’s head to the desired component as the temperature source.
ASST Fan 1 Speed Low Limit [300 RPM]
This item allows you to disable or set the assistant fans’ warning speed.
Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
ASST Fan 1 Profile [Standard]
This item allows you to set the appropriate performance level of the assistant fans.
[Standard] Set to make the assistant fan adjust automatically depending on the
chassis temperature.
[Silent] Set to minimize the fan speed for quiet assistant fan operation.
[Turbo] Set to achieve maximum assistant fan speed.
[Manual] Set to assign detailed fan speed control parameters.
The following items appear only when you set the ASST Fan 1Prole to [Manual].
ASST Fan 1 Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 40°C to 90°C.
ASST Fan 1 Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum assistant fan duty cycle.
The values may differ via Qfan tuning.
ASST Fan 1 Lower Temperature [40]
Use the <+> or <-> keys to adjust the assistant fans’ lower temperature.
The values may differ via Qfan tuning.

Table of Contents

Related product manuals