Asus Gryphon Z97 - Page 92

3-24
Chapter 3: BIOS setup
Chapter 3
CPU Internal Power Saving Control
Power Saving Level 1 Threshold [Auto]
Lower value provides sufcient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition. Use <+> or <-> key to
adjust the value. The values range from 0 A to 80 A at 1 A increment.
Power Saving Level 2 Threshold [Auto]
Lower value provides sufcient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition. Use <+> or <-> key to
adjust the value. The values range from 0 A to 50 A at 1 A increment.
Power Saving Level 3 Threshold [Auto]
Lower value provides sufcient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition. Use <+> or <-> key to
adjust the value. The values range from 0 A to 30 A at 1A increment.
Extreme Over-voltage [Disabled]
This item allows you to set higher voltages for overclocking. When you enable this item, you
can choose a high level voltage to overclock, but does not guarantee the CPU life.
Conguration options: [Disabled] [Enabled]
You can only enable this item when the onboard OC_CPU jumper is set to ON. Refer to
section 1.2.7 Jumpers of this user guide for more details.
CPU Core Voltage [Auto]
This item allows you to congure the amount of voltage fed to the CPU cores. Increase the
voltage when setting a high Core Frequency value.
Conguration options: [Auto] [Manual Mode] [Offset Mode]
The following item appears only when you set the CPU Core Voltage to [Manual Mode].
CPU Core Voltage Override [Auto]
This item allows you to set the CPU Core Voltage override. Use the <+> or <-> keys to
adjust the value, The values range from 0.001V to 1.920 V with a 0.001 V interval.
The following items appear only when you set the CPU Core Voltage to [Offset Mode].
Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Core Voltage Offset
Use the <+> or <-> keys to adjust the value. The values range from 0.001
V to 0.999 V with a 0.001 V interval.