EasyManua.ls Logo

Asus H110I-PLUS D3 - Memory Configuration; Pch Configuration; Pch Storage Configuration; Pci Express Configuration

Asus H110I-PLUS D3
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iGPU Multi-Monitor [Disabled]
This item allows you to empower both integrated and discrete graphics devices for the
multi‑monitor output. The CPU graphics shared system memory size is xed at 64 MB.
Conguration options: [Disabled] [Enabled]
RC6(Render Standby) [Enabled]
Allows you to enable or disable Intel
®
Graphics Render Standby support to reduce
iGPU power use when the system is idle. Conguration options: [Disabled] [Enabled]
DVMT Pre-Allocated [32M]
Allows you to select the amount of system memory pre‑allocated to DVMT 5.0 used by
the internal graphics device. Conguration options: [32M] [64M] [96M] [128M] [160M]
[192M] [224M] [256M] [288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M]
[1024M]
DMI/OPI Conguration
This item allows you to control various DMI (direct media interface) to run at PCI‑E 2.0 speed.
DMI Max Link Speed [Auto]
Allows you to congure the DMI speed. Conguration options: [Auto] [Gen1] [Gen2]
PEG Port Conguration
Allows you to congure the PEG Port settings.
PCIEx16_1 Link Speed [Auto]
Allows you to congure the PCIEx16 speed for slot 1. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
Memory Conguration
Allows you to congure the memory conguration parameters.
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64‑bit operating
systems. Conguration options: [Enabled] [Disabled]
2.6.4 PCH Conguration
This item allows you to congure the PCI Express conguration settings.
PCI Express Conguration
PCIe Speed [Auto]
Allows you to congure the PCIe speed. Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
2.6.5 PCH Storage Conguration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Conguration options: [Disabled] [Enabled]
The following items appear only when you set the SATA Controller(s) to [Enabled].
ASUS H110I-PLUS D3 2‑25

Table of Contents

Other manuals for Asus H110I-PLUS D3

Related product manuals