Do you have a question about the Asus H81-PLUS and is the answer not in the manual?
Non-ECC | Yes |
---|---|
Memory channels | Dual-channel |
Memory slots type | DIMM |
Number of memory slots | 2 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 16 GB |
Supported memory clock speeds | 1066, 1333, 1666 MHz |
Processor socket | LGA 1150 (Socket H3) |
Processor manufacturer | Intel |
Compatible processor series | Intel Celeron, Intel Pentium |
USB 2.0 connectors | 3 |
Number of SATA connectors | 4 |
Number of EATX power connectors | 1 |
USB 3.2 Gen 1 (3.1 Gen 1) connectors | 0 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Audio chip | Realtek ALC887 |
Component for | PC |
Motherboard chipset | IntelĀ® H81 |
Audio output channels | 7.1 channels |
Motherboard form factor | ATX |
Windows operating systems supported | Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64 |
Supported storage drive interfaces | SATA II, SATA III |
Maximum resolution | 1920 x 1200 pixels |
Maximum graphics card memory | 1024 MB |
Parallel processing technology support | Not supported |
Cables included | SATA |
LAN controller | Realtek RTL8111G |
Ethernet interface type | Gigabit Ethernet |
BIOS type | UEFI AMI |
ACPI version | 2.0a |
BIOS memory size | 64 Mbit |
Depth | 188 mm |
---|---|
Width | 305 mm |
General precautions to prevent electrical shock hazards during system handling and operation.
Precautions for safe operation, including avoiding short circuits and environmental factors.
Lists proprietary ASUS technologies like 5X Protection, DIGI+ VRM, DRAM Fuse, etc.
Safety precautions before installing motherboard components or changing settings.
Step-by-step guide for installing the CPU into the socket.
Instructions for installing the CPU heatsink and fan assembly.
Details on installing memory modules and OS limitations.
Step-by-step guide for installing a DIMM into a socket.
Step-by-step guide for removing a DIMM from a socket.
Steps for installing an expansion card into a slot.
Function and diagram of the CLRTC jumper for clearing CMOS.
Procedure for clearing CMOS RTC RAM data.
Explains ATX power connectors and PSU recommendations.
Explains fan connectors and features like Q-Fan.
Description of the EZ Update utility for BIOS/driver updates.
Instructions for updating BIOS using the ASUS EZ Flash 2 utility.
Information on BIOS recovery using the CrashFree BIOS 3 utility.
Steps for confirming and completing the BIOS update process.
How to access the BIOS setup program immediately after powering on.
Alternative methods to access the BIOS setup after the system starts.
How to set, change, or clear the administrator password.
How to set, change, or clear the user password.
Introduces the menu items for configuring overclocking-related settings.
Settings for automatically or manually adjusting CPU core ratio.
Configures 1-Core, 2-Core, 3-Core, and 4-Core Ratio Limits.
Settings for minimum and maximum CPU Cache Ratio.
Configuration of Primary and Secondary DRAM timings.
Settings for RTL and IOL control parameters.
Configuration of various third DRAM timing parameters.
Covers CPU Load-Line Calibration, CPU Fixed Frequency, CPU Power Phase Control.
Covers Manual Adjustment, CPU Power Duty Control, CPU Current Capability.
Covers Enhanced Intel SpeedStep Technology and Turbo Mode.
Various CPU internal power management and saving settings.
Covers Over-voltage, CPU Core Voltage, and CPU Cache Voltage.
Covers CPU Graphics, System Agent, and Analog I/O Voltages.
Covers Digital I/O, SVID Support, CPU Input, DRAM, PCH Voltages.
Settings related to CPU features like Thermal Monitor, Hyper-threading, Core activation.
Controls for CPUID, Execute Disable Bit, Virtualization, and Prefetching.
Settings for SATA mode selection and aggressive LPM.
Controls for CPU and chassis fan speed and profiles.
Settings for accelerating the system boot speed.
Covers storage/PCIe boot options and Secure Boot configuration.
Manages Secure Boot keys including KEK, DB, and DBX.