Asus M2N68-AM PLUS ION SI - IDE Configuration

2-16 Chapter 2: BIOS setup
2.3.4 IDE Conguration
The items in this menu allow you to set or change the congurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
congure the item.
Onboard IDE Controller [Enabled]
Allows you to enable or disable the onboard IDE controller.
Conguration options: [Enabled] [Disabled]
Serial-ATA Devices [Enabled]
Allows you to disable or set the Serial-ATA devices.
Conguration options: [Enabled] [Disabled]
SATA Mode select [SATA Mode]
Allows you to select the SATA Mode. Conguration options: [SATA Mode] [RAID
Mode]
The following two items appear only when the SATA Mode select item is set to
[RAID Mode].
SATA1/SATA2 [Disabled]
Allows you to disable or enable the SATA1/SATA2.
Conguration options: [Enabled] [Disabled]
SATA3/SATA4 [Disabled]
Allows you to disable or enable the SATA3/SATA4.
Conguration options: [Enabled] [Disabled]
IDE Conguration
Onboard IDE Controller [Enabled]
Serial-ATA Devices [Enabled]
SATA Mode select [SATA Mode]
Disabled: disables
the integrated IDE
Controller.
Enabled: enable
the integrated IDE
Controller.