1.2 Motherboard overview
1.2.1 Motherboard layout
Place six screws into the holes indicated by circles to secure the motherboard to the
chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis.
Ensure that you install the motherboard into the chassis in the correct orientation. The edge
with external ports goes to the rear part of the chassis.
1.2.2 Layout contents
Connectors/Jumpers/Slots Page Connectors/Jumpers/Slots Page
1. Keyboard/mouse power (3-pin KBPWR) 1-8 9. USB connectors (10-1 pin USB56 USB78,
and USB 910)
1-11
2. USB device wake-up (3-pin USBPW1-4 ,and5-8) 1-7 10. Clear RTC RAM (3-pin CLRTC) 1-7
3. ATX power connectors (24-pin EATXPWR, 4-pin
ATX12V)
1-12 11. Speaker connector (4-pin SPEAKER) 1-12
4. CPU fan connector (4-pin CPU_FAN) 1-11 12. Onboard LED 1-1
5. AM2/AM2+ CPU socket 1-3 13. System panel connector (10-1 pin PANEL) 1-13
6. DDR2 DIMM slots 1-3 14. Digital audio connector (4-1 pin
SPDIF_OUT)
1-14
7. Serial ATA connectors (7-pin SATA1-4) 1-9 15. Optical drive audio connector (4-pin CD) 1-10
8 IDE connector (40-pin PRI-EIDE) 1-10 16. Front panel audio connector (10-1 pin
AAFP)
1-13
1-2ASUS M2N68-AM PLUS
To Next Page
Loading...
