2-36 Chapter 2: BIOS setup
2.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
Species the Boot
Device Priority
sequence.
A virtual oopy disk
drive (Floppy Drive
B:) may appear when
you set the CD-ROM
drive as the rst
boot device.
Boot settings
Boot Device Priority
Boot Settings Conguration
Security
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
2.6.1 Boot Device Priority
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number
of devices installed in the system. Conguration options: [xxth Drive] [Hard Drive]
[ATAPI CD-ROM
] [Disabled]
To Next Page
Loading...
Need help?
General
