3-4 Chapter 3: Software support
ENTER=Continue ESC=Cancel F3=Exit
Please insert the disk labeled
Manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready.
Windows Setup
Using the driver disks you created:
• Insert Disk1 when you see the following instruction in Windows Setup.
DO NOT remove Disk1 until you are asked to insert Disk2.
• Remove Disk1, and insert Disk2 when you see the following instruction in
Windows XP Setup.
• Follow the succeeding screen instructions to complete the setup.
Insert the disk labeled:
NVIDIA RAID DRIVER <SCSI> disk 2
into Drive A:
* Press ENTER when ready.
Windows XP Professional Setup
F3=Exit ENTER=Continue
To Next Page
Loading...
