Asus M4A79XTD - Motherboard - ATX - Page 69

ASUS M4A79XTD EVO 3-13
Chapter 3
CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the FSB Frequency. Use <+>
and <-> to adjust the ratio. The valid value ranges vary according to your CPU model.
CPU Over Voltage [Auto]
Allows you to set the CPU over voltage. Conguration options: [Auto] [Normal] [+50mv]
[+100mv] [+150mv]
VDDNB Over Voltage [Auto]
Allows you to set the VDDNB over voltage. Conguration options: [Auto] [Normal] [+33mv]
[+66mv] [+100mv]
HT Link Speed [Auto]
Allows you to select the HyperTransport link speed.
Conguration options: [Auto] [200MHz] [400MHz] [600MHz] [800MHz] [1000MHz] [1200MHz]
[1400MHz] [1600MHz] [1800MHz] [2000MHz]
HT Link Width [Auto]
Allows you to select the HyperTransport link width.
Conguration options: [Auto] [4 Bit] [8 Bit] [16 Bit]
HT Voltage [Auto]
Allows you to set the HyperTransport voltage. The values range from 1.20V to 1.50V with a
0.02V interval. Use the <+> and <-> keys to adjust the value.
DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency.
Conguration options: [Auto] [800MHz] [1067MHz] [1333MHz] [1600MHz]
DDR3 Memory Prole [Disabled]
Allows you to enable or disable the DDR3 memory prole function.
Conguration options: [Disabled] [Enabled]
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.50V to 2.50V with a 0.02V
interval. Use the <+> and <-> keys to adjust the value.