Asus MG248 series - Detaching the Arm for VESA Wall Mount

2-3ASUS MG248 Series LCD Monitor
2.3 Detachingthearm(forVESAwall
mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes. (Figure 1)
3. Remove the base (Figure 2).
4. Use a screwdriver to remove the screw on the hinge (Figure 3), then remove
the hinge.
2
1
(Figure 1) (Figure 2)
2
1
(Figure 3)
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.