Asus MG248 series - Page 21

3-3ASUS MG248 Series LCD Monitor
• NVIDIA
®
LightBoost
™
: User can enjoy twice the brightness of
conventional 3D technology in 3D mode with zero increase in total energy
consumption*
*Compatible with the NVIDIA 3D Vision
®
2 kit. To activate NVIDIA 3D
function, turn off Adaptive-Sync first and make sure that the input source is
DipslayPort or DVI.
4. Image
Set the image related setting from this menu.
Sharpness
Trace Fre e
Aspect Co n t r o l
ASCR
Adaptive- S y n c
Image
ASU S MG2 4 8
Rac i ngMo d e HD M I 1 0 80p 6 0Hz
• Sharpness: The adjusting range is from 0 to 100.
• TraceFree: Adjusts the response time of the monitor.
• AspectControl: Adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
• ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
• Adaptive-Sync(DisplayPort only)
: Allows an Adaptive-Sync supported*
graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efcient, virtually stutter free and
low-latency display update.
To activate Adaptive-Sync, turn off NVIDIA 3D function first.
* Adaptive-Sync can only be activated within 40Hz ~ 144Hz.
* For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.