Asus Notebook PC - Secondary IDE (sub-menu)

71
4. Using the Notebook PC
Secondary IDE (sub-menu)
This field is used to configure the secondary IDE drive installed in the system. To configure a hard disk
drive, select this sub-menu from the Main menu and press the Enter key to enter this sub-menu.
The fields and options on this sub-menu are the same as the previous menu described earlier. Set the
type as CD-ROM in this field to support an inserted CD-ROM or DVD drive module.
NOTE: After using the legend keys to make your selections in this sub-menu, press
the [Esc] key to return to the Main menu.
Item Specific Help
Secondary IDE [TOSHIBA DVD-ROM SD-C2402]
Type [Auto]
PIO Mode [4]
ULTRA DMA Mode [2]
<Enter> to select the
type of the IDE drive.
[User Type HDD] allows
you to set each entry on
your own.
WARNING: Ultra DMA mode
3/4 can be enabled only
when BIOS detects
shielded 80-pin cable.