84
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the Setup menus. When
this option is selected or if [F9] is pressed, a confirmation is requested. Select Yes to load default values
programmed into the BIOS file (the default values may change from one BIOS version to another). You
can now select Exit Saving Changes or make other changes before saving the values to the EEPROM.
Discard Changes
This option allows you to discard the selections you made and restore the values you previously saved.
After selecting this option, all selections are updated and a confirmation is requested. Select Ye s to
discard any changes and load the previously saved values.
Save Changes
This option saves your selections without exiting the Setup program. You can then return to other
menus and make changes. After selecting this option, all selections are saved and a confirmation is
requested. Select Yes to save any changes to the EEPROM.
4. Using the Notebook PC
To Next Page
Loading...
Need help?
General