79
4. Using the Notebook PC
Auto Suspend Timeout [Disabled]
This option is only enabled when User Define is selected in the Power Management field. This field
allows you to specify the period of inactivity before the system automatically switches to Suspend
mode. In Suspend mode, various devices including the LCD backlight are powered off and the system
enters a low power CPU state. If Advanced Power Management (APM) is used, this function will be
controlled by APM and may function differently depending on the APM settings. The configuration
options are: [Disabled] [1-2Min] [2-3Min] [4-5Min] [8-9Min] [20Min] [30Min] [40Min] [1 Hour]
HDD Power Down [Disabled]
This field allows you to specify the period of inactivity required before the hard disk spins down and
enters power saving mode. The configuration options are: [Disabled] [1 Min]...[15 Min]
Video Power Down [Disabled]
This field allows you to specify the period of inactivity required before the display panel turns off. The
configuration options are: [Disabled] [1-2Min] [2-3Min] [4-5Min] [8-9Min] [20Min] [30Min] [40Min]
[1 Hour]
Beep On Battery Low [Disabled]
This option allows you to enable or disable the low battery warning beep. The configuration options
are: [Disabled] [Enabled]
Start Battery Refreshing
This function will start a software program to remove memory effects in the battery and recalibrate the
battery gauge. Even though this Notebook PC uses a Lithium-Ion battery which is not prone to memory
effects, memory effects will still occur at the end of the battery’s life cycle. Remember that all recharge-
able batteries only have a definite number of charge and discharge cycles depending on environment
and quality of the battery pack. Remove the AC power adapter before using this function.
To Next Page
Loading...
Need help?
General