Asus P5AD2-E PREMIUM - Page 144

5-285-28
5-285-28
5-28
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
Creating as RAID 10 set (Mirrored + Striped)Creating as RAID 10 set (Mirrored + Striped)
Creating as RAID 10 set (Mirrored + Striped)Creating as RAID 10 set (Mirrored + Striped)
Creating as RAID 10 set (Mirrored + Striped)
To create a RAID 10 set:
1. From the Silicon Image
configuration utility
main menu, select
Create RAID setCreate RAID set
Create RAID setCreate RAID set
Create RAID set
then press <Enter> to
display an option menu.
2. Select
RAID 10RAID 10
RAID 10RAID 10
RAID 10, then press <Enter>.
3. Select your desired
method of configuration,
then press <Enter>.
MAIN MENU
Auto configuration
Manual configuration
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID5
RAID10
SPARE DRIVE
JBOD
Auto configurationAuto configuration
Auto configurationAuto configuration
Auto configuration
When you select
Auto configurationAuto configuration
Auto configurationAuto configuration
Auto configuration, a confirmation message
appears. Press <Y> to automatically create a RAID 1 set.
Auto-configuration creates a RAID 10 set without backup copy.
Manual configurationManual configuration
Manual configurationManual configuration
Manual configuration
a. When you select
Manual configurationManual configuration
Manual configurationManual configuration
Manual configuration, a chunk size menu
option appears. Use the up or down arrow keys to select a chunk
size appropriate to your drive usage, then press <Enter>.
MAIN MENU
Auto configuration
Manual configuration
chunk size
4K
8K
16K
32K
64K
128K
TIP: TIP:
TIP: TIP:
TIP: For server systems, use of a lower array block size is recommended.
For multimedia computer systems used mainly for audio and video editing,
a higher array block size is recommended for optimum performance.