2-6 Chapter 2: BIOS information
2.3.5 Storage Conguration
The items in this menu allow you to set or change the congurations for the SATA devices
installed in the system. Select an item then press <Enter> if you want to congure the item.
ATA/IDE Conguration [Enhanced]
Allows you to set the ATA/IDE conguration. Conguration options: [Disabled] [Compatible]
[Enhanced]
2.3.6 System Information
This menu gives you an overview of the general system specications. The BIOS
automatically detects the items in this menu.
Bios Information
Displays the auto-detected BIOS information.
Processor
Displays the auto-detected CPU specication.
System Memory
Displays the auto-detected system memory.
The following item appears only when you set the ATA/IDE Conguration item to
[Enhanced].
IDE Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices.
Conguration options: [0] [5] [10] [15] [20] [25] [30] [35]
Enhanced Mode Support On [S-ATA]
Conguration options: [S-ATA+P-ATA] [S-ATA] [P-ATA]
The following item appears only when you set the ATA/IDE Conguration item to
[Compitable].
Legacy IDE Channels [PATA Pri, SATA Sec]
Conguration options: [SATA Only] [PATA Pri, SATA Sec] [PATA Only]