Asus P5KC - Chipset

ASUS P5KC 4-23
4.4.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARMING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Conguration
Congure North Bridge
features.
BIOS SETUP UTILITY
Advanced
North Bridge Chipset Conguration
Memory Remap Feature [Enabled]
Initiate Graphic Adapter [PEG/PCI]
PEG Port Control [Auto]
PEG Port Force x1 [Disabled]
ASUS C.G.I Function [Auto]
North Bridge Conguration
BIOS SETUP UTILITY
Advanced
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI
memory above the total physical memory. Enable this option only when you
install 64-bit operating system. Conguration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Conguration options: [PCI/PEG] [PEG/PCI]
Options
Disabled
Enabled
PECI [Enabled]
Allows you to enable or disable the PECI interface.
Conguration options: [Disabled] [Enabled]
The following item appears when you set CPU Ratio Control to [Auto]
Intel(R) SpeedStep (TM) Tech. [Disabled]
Conguration options: [Disabled] [Automatic]