Asus P5KPL SE - North Bridge Configuration; South Bridge Configuration

ASUS P5KPL SE 2-25
North Bridge Conguration
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. We recommend that you set this item to Enabled when
you install 4GB memory. Conguration options: [Enabled] [Disabled]
Congure DRAM Timing by SPD [Enabled]
Allows you to enable or disable conguring DRAM Timing by SPD.
Conguration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Conguration options: [PCI/PEG] [PEG/PCI]
PEG Port Conguration
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Force x1.
Conguration options: [Enabled] [Disabled]
North Bridge chipset Conguration
Memory Remap Feature [Disabled]
Congure DRAM Timing by SPD [Enabled]
Initiate Graphic Adapter [PEG/PCI]
PEG Port Conguration
PEG Force x1 [Disabled]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
South Bridge Conguration
Options
South Bridge chipset Conguration
Audio Controller [Azalia]
Front Panel Support Type [HD Audio]
Audio Controller [Azalia]
Allows you to set the audio controller. Conguration options: [Azalia] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to select the front panel support type. If High Denition Audio
Front Panel used, please set HD Audio mode. Conguration options: [AC97]
[HD Audio]
Azalia
Disabled