2-30 Chapter 2: BIOS setup
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
2.5.6 Hardware Monitor
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Monitor
MB Temperature [45ºC/113ºF]
CPU Temperature [35ºC/96.5ºF]
CPU Fan Speed [3770 RPM]
Chassis Fan1 Speed [N/A]
Chassis Fan2 Speed [N/A]
CPU Voltage Selection [ 1.248V]
3.3V Voltage [ 3.430V]
5V Voltage [ 5.004V]
12V Voltage [11.554V]
Q-Fan Control [Disabled]
CPU Temperature [xxxC/xxxF]
MB Temperature [xxxC/xxxF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select [Ignored] if you do not wish to
display the detected temperatures.
Configuration options: [Ignored] [xxxC/xxxF]
CPU Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A.
Configuration options: [Ignored] [xxxRPM]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
