2-362-36
2-362-36
2-36
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
7.7.
7.7.
7.
USB connectors (10-1 pin USB56, USB78)USB connectors (10-1 pin USB56, USB78)
USB connectors (10-1 pin USB56, USB78)USB connectors (10-1 pin USB56, USB78)
USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module
cable to any of these connectors, then install the module to a slot
opening at the back of the system chassis. These USB connectors
comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
8.8.
8.8.
8.
IEEE 1394IEEE 1394
IEEE 1394IEEE 1394
IEEE 1394
aa
aa
a
port connector port connector
port connector port connector
port connector
ss
ss
s
(10-1 pin IE1394_ (10-1 pin IE1394_
(10-1 pin IE1394_ (10-1 pin IE1394_
(10-1 pin IE1394_
1; 1;
1; 1;
1;
10-1 pin10-1 pin
10-1 pin10-1 pin
10-1 pin
IE1394_2)IE1394_2)
IE1394_2)IE1394_2)
IE1394_2)
These connectors are for additional IEEE 1394a ports. Connect the
IEEE 1394a module cables to any of these connectors, then install the
module to a slot opening at the back of the system chassis.
Never connect a
USB port module cable USB port module cable
USB port module cable USB port module cable
USB port module cable to the IEEE 1394
connector. Doing so will damage the motherboard!
P5WDG2-WS PRO
®
P5WDG2-WS PRO USB 2.0 connectors
USB56 USB78
USB+5V
USB_P8-
USB_P8+
GND
NC
USB+5V
USB_P7-
USB_P7+
GND
1
USB+5V
USB_P6-
USB_P6+
GND
NC
USB+5V
USB_P5-
USB_P5+
GND
P5WDG2-WS PRO
®
P5WDG2-WS PRO IEEE 1394 connectors
IE1394_1
TPA1-
GND
TPB1-
+12V
GND
TPA1+
GND
TPB1+
+12V
IE1394_2
TPA2-
GND
TPB2-
+12V
GND
TPA2+
GND
TPB2+
+12V
Never connect a
1394 cable1394 cable
1394 cable1394 cable
1394 cable to the USB connectors. Doing so will
damage the motherboard!
To Next Page
Loading...
