Asus P6T - Motherboard - ATX - Page 181

ASUS P6T 5-5
Enabling Dual CrossFireX settings
1. In the Catalyst Control Center
window, click Graphics Settings >
CrossFireX > Congure.
2. From the Graphics Adapter list,
select the graphics card to act as
the display GPU.
3. Select Enable CrossFireX.
4. Click Apply, and then click OK to
exit the window.
Enabling Triple CrossFireX settings
1. In the Catalyst Control Center
window, click Graphics Settings >
CrossFireX > Congure.
2. From the Graphics Adapter list,
select the graphics card to act as
the display GPU.
3. Select Enable CrossFireX.
4. From the list, select the appropriate
GPU combination to apply the
CrossFireX technology.
5. Click Apply, and then click OK to
exit the window.
1
2
3
4
1
2
3
5
4