EasyManua.ls Logo

Asus P7P55D-E EVO - CPU Ratio Setting; Intel(R) Speedstep(TM) Tech; Intel(R) Turbomode Tech; Xtreme Phase Full Power Mode

Asus P7P55D-E EVO
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ASUS P7P55D-E EVO 3-17
Chapter 3
3.5.3 CPU Ratio Setting [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use the <+>
and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
3.5.4 Intel(R) SpeedStep(TM) Tech [Enabled]
[Enabled] The CPU speed is controlled by the operating system.
[Disabled] The CPU runs at its default speed.
3.5.5 Intel(R) TurboMode Tech [Enabled]
[Enabled] Allows processor cores to run faster than marked frequency in specic
condition.
[Disabled] Disables this function.
3.5.6 Xtreme Phase Full Power Mode [Auto]
[Auto] Automatic conguration.
[Enabled] Enables Full Power Mode to ensure the best CPU overclocking performance.
The following two items appear only when you set the Ai Overclock Tuner item to
[Manual], [D.O.C.P.], [X.M.P.] or [CPU Level Up].
3.5.7 BCLK Frequency [XXX]
Allows you to adjust the CPU operating frequency to enhance the system performance. Use
the <+> and <-> keys to adjust the value. You can also key in the desired value using the
numeric keypad. The values range from 80 to 500.
3.5.8 PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE
frequency. You can also key in the desired value using the numeric keypad. The values range
from 100 to 200.
3.5.9 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. The conguration options vary with the
BCLK Frequency item settings.
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
According to Intel CPU spec, CPUs with a core frequency of 2.66G support the maximum
DIMM frequency of up to DDR3 1333. To use DIMMs of a higher frequency with a 2.66G
CPU, enable the DRAM O.C. Prole feature in BIOS. Refer to section 3.5.2 Ai Overclock
Tuner for details.
3.5.10 QPI Frequency [Auto]
Allows you to set the QPI frequency.

Table of Contents

Related product manuals