Asus PA248CNV Series - Input Source Selection; System Setup and Configuration

3-7ASUS PA248CNV Series LCD Monitor
6. Input Select
In this function, you can select your desired input source.
ASUS PA248CNV
Standard Mode DisplayPort 1920 x 1200@ 75Hz
HDMI
DisplayPort
USB Type-C
Auto Source Detection
Input Select
7. System Setup
Allows you to adjust the system.
ASUS PA248CNV
Standard Mode DisplayPort 1920 x 1200@ 75Hz
Adaptive-Sync
Power Level
OSD Setup
QuickFit
DisplayPort Stream
Key Lock
Power Indicator
System Setup
• Adaptive-Sync: Allows an Adaptive-Sync supported* graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efcient, virtually stutter free and low-latency display
update.
* Adaptive-Sync can only be activated within 48Hz ~ 75Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: set DisplayPort Stream to
DisplayPort 1.2.
• Power Level:
* “Normal Level” allows the USB downstream ports/USB Type-C
ports to charge external devices when the monitor enters power
saving mode.