Asus PA279Q - Connecting Cables and Powering On

2-3ASUSPA279SeriesLCDMonitor
2.3 Connecting the cables
1. Connectthecablesasthefollowinginstructions:
 :connectoneendofthepowercordsecurelyto
themonitor’sACinputport,theotherendtoapoweroutlet.
 :
a. PlugoneendoftheHDMI/DVI/DisplayPortcabletothemonitor’sHDMI/
DVI/DisplayPortjack.
b. ConnecttheotherendoftheHDMI/DVI/DisplayPortcabletoyour
computer'sHDMI/DVI/DisplayPortjack.
c. TightenthetwoscrewstosecuretheDVIconnector.
 connecttheendwithplugtypetothemonitor’s
earphonejackwhenanHDMIorDisplayPortsignalisfed.
 :TakethesuppliedUSB3.0cable,andplug
thesmallerend(typeB)oftheUSBupstreamcabletothemonitor’sUSB
upstreamport,andthelargerend(typeA)toyourcomputer’sUSB3.0port.
MakesureyourcomputerisinstalledwiththelastestWindows7/Windows8
operatingsystem.ThatwillenabletheUSBportsonthemonitortowork.
Whenthesecablesareconnected,youcanchoosethedesiredsignal
fromtheInputSelectitemintheOSDmenu.
2.4 Turning on the monitor
Pressthepowerbutton .Seepage1-2forthelocationofthepowerbutton.The
powerindicator lightsupinwhitetoshowthatthemonitorisON.