Asus PA329CRV Series - OSD QuickFit Plus Alignment Patterns

3-7ASUS PA329CRV Series LCD Monitor
5. QuickFit Plus
In this function, you can use different kinds of alignment patterns.
To activate this function, you need to do the following: turn off PIP/PBP,
disable HDR on your device and restore your screen back to normal
position (do not rotate).
PA329CRV
3840 x 2160_60Hz
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Preset
Palette
Image
PIP/PBP
QuickFit Plus
Safe Area
Center Marker
Mirror Mode
Customization
Ruler
• Safe Area: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel. The selections
are: 1:1, Action Safe, Title Safe, 3 x 3.
• Center Marker: Adjusts the Type 1, Type 2, Type 3.
• Mirror Mode: Flip the image horizontally.
• Customization: You can decide the frame size by moving the
Menu (5-way) button up/down/left/right. You can press the Menu
(5-way) button for longer than 3 seconds to switch the measurements
between millimeter and inch.
• Ruler: This pattern presents physical ruler on top and left side. You can
press the
Menu (5-way) button for longer than 3 seconds to switch the
measurements between metric and imperial.