3-8 Chapter 3: OSD (On-Screen Display) menu
6. Signal
In this function, you can select your desired input source.
PA329CRV
3840 x 2160_60Hz
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Auto Detection
Signal
Settings
Shortcut
HDMI 1
HDMI 2
DisplayPort
USB Type C
• Auto Detection: automatically detects other active signals when
current input signal is inactive.
To activate this function, you need to do the following: remove the connection
of Daisy-Chain DisplayPort output (to disable MST output).
To Next Page
Loading...
