Asus PA329CRV Series - OSD System Settings

3-9ASUS PA329CRV Series LCD Monitor
7. Settings
Allows you to adjust the system.
PA329CRV
3840 x 2160_60Hz
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Sound
Signal
Shortcut
Media sync
Dynamic Dimming
Power Saving
OSD Setup
Settings
DisplayPort Stream
Key Lock
Power Indicator
• MediaSync: Turn on VESA MediaSync support.
* MediaSync can only be activated within 48Hz ~ 60Hz.
* For supported GPUs, minimum PC system and driver
requirements, please contact the GPU manufactures.
To activate this function, you need to do the following: turn off PIP/PBP.
• Dynamic Dimming: Synchronizes with contents while contrast
changing to execute backlight dynamic dimming. You can adjust the
synchronization speed as “Fast”, “Medium”, “Gradual” or “O”.
To activate this function, you need to do the following: turn off
PIP/PBP
.
• Power Saving: Select Normal Level for power on hub during power
saving. Select Deep Level for power off hub during power saving.
To activate daisy chaining, you need to do the following: set Power Saving to
Normal Level. Note: Input port will be xed (no auto detection) when DP out
cable is plugged.