Asus PA32UCR Series User Manual

3-7ASUS PA32UCR Series LCD Monitor
* All modes color reset:
Resets the color settings of all color modes to the factory default
value.
4. Image
Set the image related setting from this menu.
Sharpness
Trace Free
Aspect Control
Uniformity Compensation
Input Range
Motion Sync
Image
ASUS PA32UCR
Standard Mode DisplayPort 3840 x 2160@ 60Hz
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjusts the response time of the monitor.
To activate this function, you need to do the following: turn off PBP and disable
HDR on your device.
• Aspect Control: Adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
• To activate this function, you need to do the following: turn off PBP.
• 4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
• Uniformity Compensation: Adjusts different areas of the screen to
reduce any screen uniformy errors, providing consistent brightness and
color across the entire screen.
To activate this function, you need to do the following: turn off Dynamic Dimming
and disable HDR on your device.
• Input Range: To map signal range with whole black to white presented
range of display.
• Motion Sync: Simulates display as high refresh rate performance to
generate different backlight frequencies.
To activate this function, you need to do the following: turn off Ambient Effect.

Asus PA32UCR Series Specifications

General

Brand	Asus
Model	PA32UCR Series
Category	Monitor
Language	English