Asus PB238Q - Page 9

1-3ASUS LCD Monitor PB238Q Series
4. MENUButton:
• Press this button to turn on the OSD menu, or to enact the
selected OSD menu item.
• Press this button to exit the hotkey OSD menu.
5. Button:
• Press this button to increase values or to move your selection
right/up.
• Brightnesshotkey
6. Button:
• Press this button to select a desired preset mode.
• PressthisbuttontoexittheOSDmenuortogobacktothe
previous menu when the OSD menu is active.
• Press this button for 2 ~ 4 seconds to automatically adjust the
imagetoitsoptimizedposition,clock,andphase(forVGAmode
only).
7. QuickFitbutton:
• PressthisbuttontoactivatetheQuickFitfunctiondesignedfor
alignment.
• TheQuickFitfunctioncontains7pagesofcommongridpatterns,
paper sizes, and photo sizes. (Please refer to 1.3.3 QuickFit
Function)