1-3ASUS PB248 Series LCD Monitor
To change the hotkey function, go to the Shortcut > Shortcut 1 menu.•
Shortcut 4.
Default: Contrast hotkey•
To change the hotkey function, go to the Shortcut > Shortcut 2 menu.•
5. button:
Selects a desired preset mode.•
Automatically adjusts the image to its optimized position, clock, and phase •
by pressing this button for 2-4 seconds (for VGA mode only).
6.
button:
Selects an available input source. •
Press button (Input Select button) to display HDMI/DisplayPort
signals after you connect HDMI/DisplayPort cable with the monitor.
7. Power button/power indicator
Turns the monitor on/off.•
The color defi nition of the power indicator is as the below table.•
Status Description
White On
Orange Standby mode
Off Off
1.3.2 Back view
1
2
3 4
5 6 87 9 10
11
Rear connectors
Power switch1. . Press the switch to turn on/off power.
To Next Page
Loading...
