Asus PB277 Series - Monitor Introduction; Using the Controls Button

1-4
Chapter 1: Product Introduction
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
6
5
4
3
2
1
Close
Menu
QuickFit
Input Select
Blue Light Filter
1. Power Button/Power Indicator:
• Press this button to turn the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
2. Blue Light Filter:
• This is a hotkey. The default setting is Blue Light Filter.
3. QuickFit Button:
• This is a hotkey to activate the QuickFit function designed for alignment.
• The QuickFit function contains 7 pages of common grid patterns, paper
sizes, and photo sizes. See page 1-6 for details.
4. Input Select Button:
• Use this hotkey to switch from VGA, DVI, HDMI or DisplayPort input
signal.
5. Close Button
• Exit the OSD menu.