2-2
ASUS LCD Monitor PB298Q
2.2 Connecting cables
Connect the cables you need based on the introductions on chapter 1.3.2,
page 1-4.
2.3 Detaching the base and stand
To detach the base and stand:
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use your fingers to loosen the screw that lock the the base.
3. Detach the base from the stand.
4. Loosen 4 screws that locked the stand.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the base while removing the screw.
1
3
2
4
To Next Page
Loading...
