Asus PB298Q - Page 17

3-3
ASUS LCD Monitor PB298Q
• Skin Tone: Contain three color modes including {Reddish}, {Natural},
and {Yellowish}.
• Gamma: Set the color mode to {2.2} or {1.8}.
• Color Reset:
• Current mode color reset:
Reset the color settings of current color mode to the factory default
value.
• All modes color reset:
Reset the color settings of all color modes to the factory default
value.
• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from {0} ~ {100}.
3. Image
Set the image related setting from this menu.
PB298
Splendid
Color
Image
Sound
Input Select
Move Menu Exit
System Setup
Sharpness
Trace Free
Aspect Control
ASCR
50
60
Full
OFF
• Sharpness: Adjust the picture sharpness. The adjusting range is from {0}
to {100}.
• Trace Free: Speed up the response time by Over Drive technology. The
adjusting range is from lower {0} to faster {100}.
• Aspect Control: Adjust the aspect ratio to {Full}, {4:3}, {OverScan},
{1:1}. The {OverScan} is available only for HDMI source.
• ASCR: Turn on or off the dynamic contrast ratio function.