Asus PG278Q series - VESA Mount Preparation; Connecting Power and Display Cables

2-2 Chapter 2: Setup
2.2 Detaching the arm (for VESA wall
mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:
1. Have the front of the monitor face down on a table.
2. Loosen the four screws on the back of the monitor and remove the arm/base.
1
2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.3 Connecting the cables
Connect the cables as the following instructions:
DisplayPort
USB
USB
 :
a. Connect the power adapter securely to the monitor’s DC input.