Asus PQ321 Series - Specifications; Mounting Precautions

8
E
Model PQ321QE
Power requirement AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)
Operating temperature 32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption 99 W * (when using the supplied AC adapter)
Dimensions Phys. Dimension with Stand(WxHxD) 750 x 489 x 256 mm
Phys. Dimension without Stand (WxHxD) 750 x 441 x 35 mm
Box Dimension (WxHxD) 990 x 558 x 230 mm
Weight Net Weight (Esti.) 13 Kg
Gross Weight (Esti.) 17 Kg
* When using the monitor in DC19 V : 88 W
As a part of our policy of continuous improvement, ASUS reserves the right to make design and specication changes for product improvement without
prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from these values in
individual units.
Specications
• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as
plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by
the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness
of the mounting bracket.
• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the unit bottom and the side of unit. Do not hold the LCD panel or corners. This may
cause product damage, failure, or injury.
• Do not use any screw holes other than VESA holes for installation.
Mounting Precautions