Asus RAMPAGE III EXTREME - AHCI Configuration; System Information

ROG Rampage III Extreme 3-21
3.4.7 System Information
This menu gives you an overview of the general system specifications. The BIOS
automatically detects the items in this menu.
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Rampage III Extreme BIOS SETUP Version 0261
Main
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
BIOS Information
Version : 0261
Build Date: 02/11/10
Processor
Type : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz
Speed : 2800MHz
System Memory
Usable Size : 1016MB
BIOS Status
Now BIOS status : BIOS1
3.4.� AHCI Conguration
This menu is the section for AHCI configuration. It appears only when you set the
item Congure SATA as from the sub-menu of SATA Conguration to [AHCI].
Rampage III Extreme BIOS SETUP Version 0261
Main
AHCI Settings
SATA Port1 [Not Detected]
SATA Port2 [Not Detected]
SATA Port3 [Not Detected]
SATA Port4 [Not Detected]
SATA Port5 [Not Detected]
SATA Port6 [Not Detected]
While entering setup,
BIOS auto detects
the presence of
SATA devices. This
displays the status
of auto detection of
SATA devices.
SATA Port1–6 [XXXX]
Displays the status of auto-detection of SATA devices.
Rampage III Extreme BIOS SETUP Version 0261
Main
SATA Port1
Device :Not Detected
SATA Port1 [Auto]
SMART Monitoring [Enabled]
Select the type
of devices connected
to the system.
SATA Port1 [Auto]
Allows you to select the type of device connected to the system.
Configuration options: [Auto] [Not Installed]
SMART Monitoring [Enabled]
Allows you to set the Self-Monitoring, Analysis and Reporting Technology.
Configration options: [Disabled] [Enabled]