3-30 Chapter 3: BIOS setup
3.5.6 LED Control
The LED Control menu items allow you to change the advanced settings for the
onboard LEDs.
Take caution when changing the settings of the LED Control menu items.
Incorrect field values can cause the system to malfunction.
All LED Control [Enabled]
Allows you to enable or disable the onboard LEDs control.
Configuration options: [Enabled] [Disabled]
The following items appear only when you set All LED Control to [Enabled].
ROG Logo [Enabled]
Allows you to enable or disable the ROG Logo LED.
Configuration options: [Enabled] [Disabled]
Voltiminder LED [Enabled]
Allows you to enable or disable the onboard Voltiminder LED.
Configuration options: [Enabled] [Disabled]
CPU LED Selection [CPU]
Allows you to switch the onboard CPU LED display between CPU voltage [CPU],
CPU PLL voltage [CPU PLL] and QPI/DRAM core voltage [QPI/DRAM Core].
Configuration options: [CPU] [CPU PLL] [QPI/DRAM Core]
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Rampage III Extreme BIOS SETUP Version 0261
Advanced
All LED Control
←→ Select Screen
↑↓ Select Item
F1 General Help
F10 Save and Exit
ESC Exit
LED Control
All LED Control [Enabled]
ROG Logo [Enabled]
Voltiminder LED [Enabled]
CPU LED Selection [CPU]
IOH LED Selection [IOH]
ICH LED Selection [ICH]
To Next Page
Loading...
