* LAN port LED indications
Activity/Link
Speed LED
Description
OFF OFF Soft-off Mode
Yellow Blinking OFF During Power ON/OFF
Yellow Blinking ORANGE 100 Mbps connection
Yellow Blinking GREEN 1 Gbps connection
Speed
LED
Activity/
Link LED
LAN port
2.9.2 ROG Connect switch and RC Bluetooth switch
ROG Connect switch
The ROG Connect function allows you to monitor and control remotely with the
other computer through the provided ROG Connect cable.This switch also features
USB BIOS FlashBack, which enables you to flash the BIOS in standby power.
To use ROG Connect:
1. Connect one end of the ROG Connect cable to the ROG Connect port and
the other to your notebook or netbook.
2. Press the switch to start to connection.
To use USB BIOS FlashBack:
1. Download the latest BIOS from ASUS support website. Rename it R3E.ROM,
save it to a USB flash drive and place it in the root directory.
2. Connect the USB flash drive to the ROG Connect port.
3. Press and hold the ROG Connect switch until it starts blinking (with standby
power).
4. When the blinking stops, the BIOS flash completes.
Refer to the Appendix for the qualified vendor list for the USB flash disk before
using the USB BIOS Flashback function.
2-34 Chapter 2: Hardware information
To Next Page
Loading...
