4-10 Chapter 4: Software support
Information
Click the Information button ( ) to
display information about the audio
driver version, DirectX version, audio
controller, audio codec, and language
setting.
Device advanced settings
Click Device advanced settings to
show further settings for the playback
and recording device.
Digital Output
To set the digital output options
1. Click the
Digital Output
tab.
2. Click
Set Default Device
to set the
digital output port as the default audio
output device.
3. Click the
Sound Effects
sub-tab for
options on changing the acoustic
environment and karaoke settings, or
click the
Default Format
sub-tab for
options on changing the default audio output format.
4. Click
OK
to effect the Digital Output settings and exit.
Conguration options
Click any of the tabs in this area to configure your audio settings.
The Configuration options shown in this section are for reference purposes
only and may not exactly match what you see on your screen. In the Windows
Vista™ environment, Realtek HD Audio Manager automatically detects devices
connected to the analog/digital ports and shows corresponding configuration
options tabs.
Connector settings
Click the Connector Settings button
( ) to show further settings for the
analog/digital output/input ports.
To Next Page
Loading...
