Asus RAMPAGE III FORMULA - Onboard Devices Configuration

ROG Rampage III Formula 3-27
 

[Enabled] Enables the High Definition Audio Controller.
[Disabled] Disables the controller.
Front Panel Type [HD Audio]
[AC97] Set the front panel audio connector (AAFP) mode to legacy AC’97
[HD Audio] Set the front panel audio connector (AAFP) mode to high-
definition audio.
SPDIF OUT Mode Setting [SPDIF]
[SPDIF] Set the SPDIF OUT mode to SPDIF.
[HDMI] Set the SPDIF OUT mode to HDMI.
Onboard SATA Controller [Enabled]
[Disabled] Disables the SATA controller of SATA_E1.
[IDE Mode] Enables the SATA controller of SATA_E1.
GbE Controller [Enabled]
[Enabled] Enables Gbe LAN Controller.
[Disabled] Disables Gbe LAN Controller.
GbE LAN Boot [Disabled]
This item appears only when you enable the previous item(s).
[Disabled] Disables GbE LAN Boot.
[Enabled] Enables GbE LAN Boot.
GbE Wake Up From S5 [Disabled]
This item appears only when you enable the previous item(s).
[Disabled] Disables GbE to wake up from S5.
[Enabled] Enables GbE to wake up from S5.
Onboard 1394 Controller [Enabled]
[Enabled] Enables the onboard 1394 Controller.
[Disabled] Disables the controller.
Rampage III Formula BIOS Setup Version 0206
Advanced
Onboard Device Conguration
Onboard Device [Standard]
High Denition Audio [Enabled]
Front Panel Type [HD Audio]
SPDIF OUT Mode Setting [SPDIF]
Onboard SATA Controller [Enabled]
GbE Controller [Enabled]
GbE LAN Boot [Disabled]
GbE Wake Up From S5 [Disabled]
Onboard 1394 Controller [Enabled]
Onboard SATA6G Controller [IDE Mode]
Onboard USB 3.0 Controller [Enabled]
Get your best
overclocking record!
“Onboard Device” is
to disable all the
unnecessary devices
when you want to reach
your best overclocking
record. But it will
keep 1 lan port alive
to submit your score.